Zanotti DFZ Especificações descarregar pdf (Página 30)

Alarm code Description Type

A01 Water temperature alarm Automatic reset

A02 Oil pressure alarm Manual reset

A03 Thermal relay alarm Manual reset

A04 Pressure switch alarm Automatic reset

A05 Low battery level alarm Automatic reset

A06 Damaged room sensor alarm Manual reset

A07 Damaged defrost sensor alarm Warning only

A08 Starting failure/damaged alternator Manual reset

A09 High/low temperature alarm Warning only

A10 Radiator water level alarm Warning only

A11 Oil level alarm Warning only

A12 Air filter alarm Warning only

A13 Oil filter alarm Warning only

A14 Power card not present Automatic reset

A15 Damaged condensing sensor alarm Warning only

A16 Damaged water sensor alarm Warning only

A17 Door switch open alarm Automatic reset

A01 Water temperature alarm

This occurs when the radiator's water temperature exceeds the permitted value.

It turns off the diesel engine until the temperature returns to normal values.

A02 Oil pressure alarm

This alarm occurs if the engine's oil pressure drops; it permanently turns off the

diesel engine. To start the machine again, the alarm must be reset using the pro-

cedure described in the paragraph above and by pressing the ON/OFF key.

A03 Thermal relay alarm

This alarm occurs if abnormal electric motor current input values occur and it

turns off the machine. To reset the alarm, the machine must be de-energized, the

electrical switchboard must be opened, and the thermal relay must be reset by

pressing the blue button. Then close the switchboard and energize the machine

again. Go to the driver's cabin control and press the ON/OFF key.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Sem comentários

Zanotti DFZ Especificações Página 30